DIN 49642 T.18-1991 IEC灯座.灯座和连接件GY5.3
作者:标准资料网 时间:2024-04-18 05:22:12 浏览:9964
来源:标准资料网
【英文标准名称】:IEClampholders;lampholderandGY5,3connector
【原文标准名称】:IEC灯座.灯座和连接件GY5.3
【标准号】:DIN49642T.18-1991
【标准状态】:作废
【国别】:
【发布日期】:
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:
【国际标准分类号】:
【页数】:
【正文语种】:
基本信息
标准名称: | 标准参比乙炔炭黑及鉴定方法 |
英文名称: | Standard reference acetylene blank and standard practice for evaluation |
中标分类: |
化工 >>
橡胶制品及其辅助材料 >>
炭黑 |
ICS分类: |
橡胶和塑料工业 >>
橡胶原料和塑料原料 >>
橡胶合成配料
|
替代情况: | 替代GB/T 12827-1991 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2008-06-18 |
实施日期: | 2009-02-01 |
首发日期: | 1991-04-25 |
作废日期: | |
主管部门: | 全国橡胶与橡胶制品标准化技术委员会炭黑分技术委员会(SAC/TC 35/SC 5) |
提出单位: | 中国石油和化学工业协会 |
归口单位: | 全国橡胶与橡胶制品标准化技术委员会炭黑分技术委员会(SAC/TC 35/SC 5) |
起草单位: | 中橡集团炭黑工业研究设计院 |
起草人: | 聂素青、邓毅 |
出版社: | 中国标准出版社 |
出版日期: | 2009-02-01 |
页数: | 6页 |
计划单号: | 20064284-T-606 |
适用范围
本标准规定了标准参比乙炔炭黑1号(SRAB1)的主要理化性能的标准值、生产的质量控制要求及测试其均匀性的标准方法。
本标准适用于标准参比乙炔炭黑的鉴定和定值,也可适用于校正试验仪器。
前言
没有内容
目录
没有内容
引用标准
下列文件中的条款通过本标准的引用而成为本标准的条款。 凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。 凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T3780.1 炭黑 第1 部分:吸碘值试验方法(GB/T3780.1-2006,ASTM D1510:2003,StandardTestMethodforCarbonBlackIodineAdsorptionNumber,MOD)
GB/T3780.7 炭黑 第7部分:pH 值的测定(GB/T3780.7-2006,ASTM D1512:1995StandardTestMethodsforCarbonBlackpH Value,MOD)
GB/T3780.8 炭黑 第8部分:加热减量的测定(GB/T3780.8-2002,ISO1126:1992Rubbercompoundingingredients-Carbonblack-Determinationoflossonheating,MOD)
GB/T3780.10 炭黑 第10 部分:灰分的测定(GB/T3780.10-2002,ISO1125:1999Rubbercompoundingingredients-Carbonblack-Determinationofash,NEQ)
GB/T3781.5 乙炔炭黑 第5 部分:粗粒分的测定(GB/T3781.5-2006,ISO1437:1992Rubbercompoundingingredients-Carbonblack-Determinationofsieveresidue,MOD)
GB/T3781.6 乙炔炭黑 第6部分:视比容的测定
GB/T3781.8 乙炔炭黑 第8部分:盐酸吸液量的测定
GB/T3781.9 乙炔炭黑 第9部分:电阻率的测定
GB/T3782 乙炔炭黑(GB/T3782-2006,JISK1469-1989,NEQ)
所属分类: 化工 橡胶制品及其辅助材料 炭黑 橡胶和塑料工业 橡胶原料和塑料原料 橡胶合成配料
Product Code:SAE AIR1168/12
Title:Spacecraft Thermal Balance (STABILIZED Jul 2011)
Issuing Committee:Ac-9 Aircraft Environmental Systems Committee
Scope:In the design of spacecraft, heat transfer becomes a criterion of operation to maintain structural and equipment integrity over long periods of time.The spacecraft thermal balance between cold space and solar, planetary, and equipment heat sources is the means by which the desired range of equipment and structural temperatures are obtained. With the total spacecraft balance set, subsystem and component temperatures can be analyzed for their corresponding thermal requirements.This section provides the means by which first-cut approximations of spacecraft surface, structure, and equipment temperatures may be made, using the curves of planetary and solar heat flux in conjunction with the desired coating radiative properties. Once the coating properties have been determined, the material to provide these requirements may be selected from the extensive thermal radiative properties tables and curves.These can then be cross checked to determine the degradation effects of space that may cause extensive temperature changes over long periods of time. The paragraphs reviewing previous spacecraft thermal designs, test facilities, and methods of testing should be used as a guide in the development of a design. This section assumes that the reader is familiar with the methods of thermal analyzer techniques and has available, through SHARE or other agencies, multinodal programs to solve the detailed temperature distributions required to complete a design.